rockstone Postat 22 januari 2011 Postat 22 januari 2011 har lagt märke till att på min american standard fender så är det olika höjd på magneterna på micarna, dom är högst på strängarna i mitten, men på min mexico strata så är alla magneterna exakt lika höga, kan nån förklara lite varför det ser ut så här?
Robert Smedberg Postat 22 januari 2011 Postat 22 januari 2011 http://en.wikipedia.org/wiki/Single_coil
kolin Postat 25 januari 2011 Postat 25 januari 2011 Jag vet inte vem som skrev detta på Wiki... men det är många olika variabler som det beror på. De olika höjderna på magneterna kanske gjorde skillnad och var uträknad hos den första som konstruerade en singlecoil men kan enligt min mening att se det inte spela nån större roll rent elektromagnetiskt, åtminstone inte på ett generellt sett. Men det vore skoj om flera elektromagnetiker funderar på frågan så kanske vi kan få en helt ny tråd som kanske oxå kan ge lite ny info till wiki... Kolin
Gratch (oregistrerad) Postat 25 januari 2011 Postat 25 januari 2011 "The magnet poles have different heights. This is called a magnet stagger and is done to compensate for the different outputs of the string for two reasons. The first reason is that the fretboard has a radius (also called camber) of between 7 and 12 inches usually. Naturally the strings will follow the radius of the fretboard and so must the top surface of the magnets, generally speaking. The second reason is that some strings have naturally higher output, the plain or non-wound G-string being the most significant and this calls for the corresponding magnet to be further compensated, resulting in an apparent odd looking stagger. Fender Strat pickups generally follow the traditional design and have the G string's magnet pole piece as tall as the D-string's, but this causes the G-string of modern string sets to be excessively loud and dominate all the other strings. This comes about because Stratocaster pickups were designed in the 1950s when string sets came with a wound G-string, but modern rock and blues players found it difficult to stretch or bend wound G-strings across the fretboard because of their inherently higher tension. In the 1970s, string manufacturers responded and introduced the now standard non-wound G-string which has lower tension and can be stretched more easily, but which produces much higher output. In order for the G-string to have the same output the corresponding magnet pole should have the greatest gap between the string and the magnet pole piece, thus different strings have magnets with differently compensated heights." Citerade från wikipedia...Läsa får du göra själv 😉 Kan själv inte förklara det bättre eller på något annat sätt men jag tycker det låter bra iaf^^
Recommended Posts
Bli medlem (kostnadsfritt) eller logga in för att kommentera
Du behöver vara medlem för att delta i communityn
Bli medlem (kostnadsfritt)
Bli medlem kostnadsfritt i vår community genom att registrera dig. Det är enkelt och kostar inget!
Bli medlem nu (kostnadsfritt)Logga in
Har du redan en inloggning?
Logga in nuLogga in här.