Vet ej om Dual core fungerar som det ska

[Vegetal]

Som rubriken lyder, har aktiverat multiprocessor support i ableton men cpu-mätaren ger samma belastning oavsett om dualcore är aktiverat eller ej.

Nån som känner igen detta?

[fogden2000]

🙂😕 Redigerat 4 maj 2007 av fogden2000

[Vegetal]

Well då ingen verkar veta hur detta funkar så postar jag supportens svar.

how many tracks are running when you check the CPU load? Live can only

allocate different tracks to each CPU core, i.e. track 1 will be

calculated by CPU core #1 and track 2 will be calculated by CPU core #2.

If you ran your test with only 1 track running, you won't notice any

change on Live's CPU meter, since only 1 core is being used.

Try the following to verify if the multi-core support works fine on your

computer:

-enable the multicore support in Live's preferences

-create 1 track + clip and load various instruments and effects, so that

the CPU load reaches around 30% when you run the clip.

-duplicate the track (right click on the track's title bar and choose

'duplicate')

-> the CPU meter should still stay at 30% (due to other running threads

on track 2 you may note a slight increase of the CPU load, so it could

reach 35% or so).

-open preferences and disable the multicore support

-> the CPU meter should now jump to around 60%

This would ensure that everything is working as expected. If you get

already 60% for both tracks even though multicore support is ENABLED,

then there could be something wrong with your computer.