Jump to content
  • Similar Content

    • By SeatbeltHands
      hej! spelar in i Logic, har steinberg ljudkort ( nyligen köpt), kopplar in RÖDE micken i INPUT 1 och pluggar in gitarren i INPUT 2.
      Problemet är att signal från Input 1 finns men inte från Input 2? När jag byter plats på micken och gitarren så är det samma problem Input 1 svarar men inte input 2 🙁
      Det skumma med det hela är att jag någon enstaka gång fick det att fungera i ett projekt och när jag öppnar det projektet så fungerar det fortfarande! men gör jag ett nytt projekt så får jag inte signal....
      när jag väl får signal från INPUT 2 oc har pluggat in gitarren så låter denna extremt knastrigt?
    • By Nyhetsroboten
      Continuing UA's 60‑year legacy of audio craftsmanship, Apollo Solo puts professional recording within reach of serious desktop musicians and producers everywhere.

      Sonically outperforming anything in its class, and featuring a studio full of classic gear emulations, Apollo Solo delivers album‑quality results, in real time, right out of the box.
      World-class A/D and D/A conversion — as heard on hundreds of hit records
      Unison™ mic preamp and guitar amp emulations from Neve, Avalon, Manley, Marshall, Fender & more
      Realtime UAD-2 SOLO Processing for authentic analog tones and ultra low‑latency recording
      Clear, detailed monitoring with the best‑sounding headphone amplifier in its class
      Available as Apollo Solo Thunderbolt (Mac/Win) or Apollo Solo USB (Win)
      Includes LUNA Recording System (Mac)
      Apollo Solo is now shipping worldwide for Mac and Windows.
      > Learn more about Apollo Solo Thunderbolt 3
      > Learn more about Apollo Solo USB
    • By Nyhetsroboten
      Haimhausen August, 2020 – RME introduces the HDSPe AIO Pro PCI Express interface card, the successor of the popular HDSPe AIO. The Pro version provides professional users in the fields of studio and broadcast with the same high channel count as well as analog/digital input and output variety of the HDSPe AIO. In terms of technical features RME has completely reworked the HDSPe AIO Pro, defining the current state-of-the-art in PCI Express cards.

      The HDSPe AIO Pro features a total of 30 channels (14 input, 16 output), each with a maximum of 24 bit/192 kHz. This PCI Express audio interface is an all-in-one solution offering analog stereo input and output, an additional headphone output,  ADAT, SPDIF and AES/EBU I/O as well as one MIDI I/O. Like its predecessor, all in- and outputs can be used simultaneously.
      The new HDSPe AIO Pro is based on the reference processors AK5572 and AK4490 derived from the high-end AD/DA converter ADI-2 Pro. The analog input range also uses the circuit design of the ADI-2 Pro (+24 / +19 / +13 / +4 dBu). In addition, RME has enhanced the outputs with additional reference levels (balanced: +24 / +19 / +13 / +4 dBu; unbalanced: +19 / +13 / +4 / -2 dBu) which allows even more versatile integration into audio systems. The HDSPe AIO Pro features a dedicated attenuator in the output section, resulting in an increased signal-to-noise ratio and a lower output impedance at low reference levels.
      With the SteadyClock FS, the HDSPe AIO Pro features the latest clock and jitter rejection technology from RME. Based on a femtosecond clock SteadyClock FS reduces the intrinsic jitter when converting from and to analog over all digital formats to a new all-time low.
      A further highlight of the HDSPe AIO Pro is the newly developed, powerful and extremely transparent headphone output. Thanks to mute relay including switchable output levels, there is no unwanted crackling noise at the headphone output and the analog XLR and RCA outputs when switching on the computer.
      The HDSPe AIO Pro PCI Express audio interface card will be available from September 2020.
      The MSRP excl. VAT is 587.36 Euro.
    • By Nyhetsroboten
      July 16, 2020 - IK Multimedia's AXE I/O SOLO is the latest addition to its range of AXE I/O® high-end guitar interfaces with advanced tone-shaping features. It maintains the award-winning, best-in-class tone from the original while offering a more budget-friendly, mobile format.

      AXE I/O SOLO is a compact, bus-powered 2-in/3-out USB audio interface that features IK's high-end PURE microphone preamp; an instrument input with proprietary tone-shaping options; an exclusive Amp Out to incorporate real gear into a recording setup; and 24-bit, 192 kHz converters with a wide dynamic range, for pristine recordings in all musical genres.
      AXE I/O SOLO can also act as a controller for use with IK's included AmpliTube® or other favourite guitar-friendly software, offering a complete, affordable solution for players who want the best possible tone for their tracks.
      A crystal-clear mic preamp
      AXE I/O SOLO offers IK's high-definition, Class A PURE mic preamp, designed for transparent and clean recording. An extended, flat frequency response captures the full tonal range of voices and instruments without colouring the sound. A best-in-class dynamic range ensures ultra-quiet recordings.
      Exclusive guitar tone shaping
      Proprietary tone-shaping options let users dial in the perfect settings for their instruments or coax a wider range of tones from a single instrument:
      First, an active & passive pickup selector adapts instantly to any instrument. The active channel bypasses unneeded gain stages, ensuring the signal is always as direct and uncoloured as possible.
      Next, AXE I/O SOLO offers both a PURE circuit for pristine, transparent sound and a JFET circuit for adding warmth and harmonics, all within a single device.
      Finally, IK's proprietary Z-TONE® impedance-adapting circuit lets users adjust the input impedance to interact with their guitar's pickups: at the maximum impedance, sounds are tighter, sharper and more precise, and at lower impedances the sound becomes thicker and bolder.
      These controls give guitars even more sonic character - with just a few minutes' experimentation, users can dial in a sound that perfectly fits the mix.
      Hassle-free re-amplification
      AXE I/O SOLO offers a streamlined re-amplification setup in a single box.  A front panel Amp Out lets guitar and bass players incorporate real amplifiers and stompboxes without the need for an external conversion box. This low-noise out also eliminates ground loops, to keep even the highest-gain re-amplification as quiet as possible.
      Premium sound throughout
      AXE I/O SOLO preserves the best-in-class dynamic range, ultra-low self noise and wide, extended frequency response of the original AXE I/O, ensuring premium sound quality for recording both instruments and vocals.
      Convenient connectivity and control
      1/4" balanced outputs and a headphones out provide comprehensive connections, and a "blend" knob mixes direct and processed signal for zero-latency monitoring.  In addition, AXE I/O SOLO also features two dedicated inputs for controller pedals and switches, plus MIDI In/Out, offering a range of options for real-time control over amp modelling plug-ins or recording software.

      A massive software bundle
      For seamless, out-of-the-box recording and processing, AXE I/O SOLO comes bundled with AmpliTube 4 Deluxe, IK's powerful guitar and bass tone studio for Mac/PC, as well as a suite of T-RackS mixing & mastering plug-ins and Ableton Live 10 Lite recording software.
      Pricing and availability
      AXE I/O SOLO is now available from the IK Multimedia online store and from IK authorized dealers worldwide.
      For more information about AXE I/O SOLO, please visit: www.ikmultimedia.com/axeiosolo
      To see AXE I/O SOLO in action: www.ikmultimedia.com/axeiosolo/video
    • By Musikskapare
      Efter en del CPU problem som berodde på en gammal dator, samt processor, har jag nu tänkt att införskaffa mig en ny dator. Datorn heter ”ASUS ZeenBook UX431”, den har en Intel i5 processor med 8gb RAM minne och 256gb lagringsutrymme. Denna datorn kommer jag endast använda för musikproduktion och för Netflix! Inga installationer av andra program förutom musikprogram. Musikprogrammet är FL studio som jag gärna vill använda. Tror ni datorn räcker för det? 
      Sedan ska jag även installera min ZOOM U-24 ljudkort till denna nya datorn då, men undrar ifall jag måste avinstallera programmet från min nuvarande dator och installera den igen på den nya eller ifall det går bra att installera den på den nya datorn utan att behöva avinstallera den från den nuvarande datorn? Tacksam för hjälp! 🙂 
  • Utvalda blogginlägg

  • Veckans populäraste ämnen

  • Utvalda pressmeddelanden

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.